-
DESCRIPCIÓN: 3-WAY BALL VALVE SERIES B65 threaded connections NPT HT16198 RATING 3600 PSI from -20ºf to 100ºF Maximum PTFE temperature 446ºF FEATURES Constructed of Stainless Steel. Grade 316 Stainless Steel PTFE gaskets Stainless Steel Ball Grade 316 Stainless Steel Mando direccional de aluminioLinea Family Instrumentation valves Ball Valves Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: Tube fittings with Megalok® double compression ring system MECESA is pleased to present the MEGALOK fittings in its desire for perfection and better service, trying to provide as much information as possible and extending its range to the needs that we believe are most frequent. All this is the result of our constant line of avant-garde in the very varied production of fittings.Linea Family Fittings and Piping Tube Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment - They are manufactured in three types of materials: 316 grade stainless steel, carbon steel and brass. In installations with plastic tubing, the rings will be made of nylon for brass fittings and PTFE for stainless steel fittings. On request, they can be manufactured in other materials (see Special Materials catalogue).
- Stainless steel and brass fittings are supplied pickled and passivated, and carbon steel fittings are phosphated. Other finishes are available on request. The tube shall have a smooth surface finish, free of grooves in order to achieve a perfect assembly of the two rings to the tube.
- PIPE, in inches, from 1/8 "OD to 1 "OD. PIPE, in millimetres, from 4 mm to 25 mm. Adapters for PIPE from 1/8" to 1/2" to millimetric TUBE.
- Consists of a body with a seat for the pipe, two compression rings and a locking nut. The hermetic connection of the tube to the fitting body is achieved by the pressure exerted by the two rings on the tube when they are pressed by the nut. The function of the front ring is to seal and that of the rear ring is to fix the tube to the fitting. Due to its special conception, both in design and in the variety of materials in which it is made as well as in its connections, it allows it to cover a wide range of applications.
- Applications: In vacuum, low and medium pressure, especially suitable for high pressures, or any other that requires hard work; Food field and laboratories; Resistance to the most corrosive acids; Use in hydraulic installations and gases; Suitable for pipes of stainless steel, carbon steel, copper, plastics, etc.; Can be used for high temperature and cryogenic applications; Vibration resistant; Threaded connections, NPT ANSI/ASME B1.20.1, BSPT-ISO 7R, BSP-ISO 228 and optional in DIN 3852 BSP/METRICA.
-
DESCRIPCIÓN: Tube fittings with Megalok® double compression ring system MECESA is pleased to present the MEGALOK fittings in its desire for perfection and better service, trying to provide as much information as possible and extending its range to the needs that we believe are most frequent. All this is the result of our constant line of avant-garde in the very varied production of fittings.
Linea Family Fittings and Piping Tube Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment - They are manufactured in three types of materials: 316 grade stainless steel, carbon steel and brass. In installations with plastic tubing, the rings will be made of nylon for brass fittings and PTFE for stainless steel fittings. On request, they can be manufactured in other materials (see Special Materials catalogue).
- Stainless steel and brass fittings are supplied pickled and passivated, and carbon steel fittings are phosphated. Other finishes are available on request. The tube shall have a smooth surface finish, free of grooves in order to achieve a perfect assembly of the two rings to the tube.
- PIPE, in inches, from 1/8 "OD to 1 "OD. PIPE, in millimetres, from 4 mm to 25 mm. Adapters for PIPE from 1/8" to 1/2" to millimetric TUBE.
- Consists of a body with a seat for the pipe, two compression rings and a locking nut. The hermetic connection of the tube to the fitting body is achieved by the pressure exerted by the two rings on the tube when they are pressed by the nut. The function of the front ring is to seal and that of the rear ring is to fix the tube to the fitting. Due to its special conception, both in design and in the variety of materials in which it is made as well as in its connections, it allows it to cover a wide range of applications.
- Applications: In vacuum, low and medium pressure, especially suitable for high pressures, or any other that requires hard work; Food field and laboratories; Resistance to the most corrosive acids; Use in hydraulic installations and gases; Suitable for pipes of stainless steel, carbon steel, copper, plastics, etc.; Can be used for high temperature and cryogenic applications; Vibration resistant; Threaded connections, NPT ANSI/ASME B1.20.1, BSPT-ISO 7R, BSP-ISO 228 and optional in DIN 3852 BSP/METRICA.
-
DESCRIPCIÓN: CHARACTERISTICS: FLANGE Connections:NPT (ANSI/ASME B1.20.1), ISO 228 and S.W. (Socket weld. ASME B16.11) Materials: Constructed from 316 grade Stainless Steel and Graphite Carbon Steel (PTFE packing available on request). All versions are manufactured from 316 grade stainless steel. Aluminium handwheel (Handwheel can be supplied with handle on request). The lock incorporated in the lower part of the spindle allows the packing to be changed while the valve is in service under pressure. Rating: Max. PTFE temperature 500°F (260°C) Max. pressure 3705 PSI (255 BAR)Linea Family Instrumentation valves Needle Valves Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: PRESSURE DAMPENER MAX. PRESSURE UP TO 5,140 PSI (360 BAR) FEATURES: RATING: STAINLESS STEEL. Graphite Lined 5000 PSI from -20°F to 100°F 3053 PSI at 662°F Max. STAINLESS STEEL, PTFE Lined 5000 PSI from -20°F to 100°F Maximum PTFE Temperature Rating 446°F CARBON STEEL Graphite Lined 5140 PSI from -20°F to 100°F 4200 PSI at 482°F Maximum PTFE-plated CARBON STEEL 5140 PSI from -20°F to 100°F Maximum PTFE Temperature Rating 446°F Connections: NPT (ANSI/ASME B1.20.1), ISO 228 and O.D. tubing by MEGALOK type compression rings. Materials: They are made of AC.INOX. Grade 316 and AC. CARBON. Shaft made of AC. STAINLESS STEEL. Grade 316 in all versions.Linea Family Instrumentation valves Pressure Dampers Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: UNIONS FOR PRESSURE GAUGES - FEMALE x MALE ADAPTER - MALE x FEMALE NUT ADAPTER - NIPPLER ADAPTER x NIPPLER NUT Connections: NPT (ANSI/ASME B1.20.1), ISO 7R and ISO 228Linea Family Pressure Accessories for Pressure Gauges Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: Manifold direct coupled to transmitter with H.1/2 "NPT inlet in the same body of the Manifold. Transmitter is coupled by means of two 7/16 "UNF screws (Length = 41.3) and a PTFE or Graphite gasket. Coupling dimensions (DIN 19213) Gasket and flange dimensions (MSS SP-99) Screw 7/16 "UNF: Ref. 5CV-33880.004A for AC Manifold. STAINLESS STEEL, and Ref. 5CV-33880.054B for AC. CARBON Seal: Ref. 5CV-32055.301B for Manifold with PTFE packing, and Ref. 5CV-32055.029A for Manifold with GRAPHITE packing. Screws and gaskets supplied together with the manifold.Linea Family Manifolds MC Series: Manifolds max pressure 420 bar (6000 psi) Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: Manifold direct coupled to transmitter with H.1/2 "NPT inlet in the same body of the Manifold. Transmitter is coupled by means of four 7/16 "UNF sockets (Length = 25) and two PTFE or Graphite gaskets. Coupling dimensions (DIN 19213) Gasket and flange dimensions (MSS SP-99) Screw 7/16 "UNF: Ref. 5CV-09435.004A for AC Manifold. STAINLESS STEEL, and Ref. 5CV-09435.054B for AC. CARBON Seal: Ref. 5CV-32055.301B for Manifold with PTFE packing, and Ref. 5CV-32055.029A for Manifold with GRAPHITE packing. Screws and gaskets supplied together with the manifold.Linea Family Manifolds MC Series: Manifolds max pressure 420 bar (6000 psi) Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: Manifold with direct coupling to transmitter with H.1/2 "NPT inlet in the same body of the Manifold. Transmitter coupling by means of two 7/16 "UNF sockets (Length = 25) and a PTFE or Graphite gasket. Coupling dimensions (DIN 19213) Gasket and flange dimensions (MSS-SP-99) Screw 7/16 "UNF: Ref. 5CV-09435.004A for AC Manifold. STAINLESS STEEL, and Ref. 5CV-09435.054B for AC. CARBON Seal: Ref. 5CV-32055.301B for Manifold with PTFE packing, and Ref. 5CV-32055.029A for Manifold with GRAPHITE packing. Screws and gaskets supplied together with the manifold.Linea Family Manifolds MC Series: Manifolds max pressure 420 bar (6000 psi) Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: Manifolds with 2 valves, one line valve with 1/2 "NPT inlet and outlet and one discharge valve with 1/4 "NPT female outlet. Standard model: Female x Female (Ref. MCZ): Process connection H.1/2 "NPT, Instrument connection H.1/2 "NPT and Purge H.1/4 "NPT. (The picture belongs to this configuration) Additional models: Male x Male (Ref. MCM): Process Connection M.1/2 "NPT, Instrument Connection M.1/2 "NPT and Purge H.1/4 "NPT Male x Female (Cat. No. MC1): Process Connection M.1/2 "NPT, Instrument Connection H.1/2 "NPT and Purge H.1/4 "NPT Female x Male (Ref. MCH): Process connection H.1/2 "NPT, Instrument connection M.1/2 "NPT and Flush H.1/4 "NPTLinea Family Manifolds MC Series: Manifolds max pressure 420 bar (6000 psi) Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: Manifold with two valves, a line valve with inlet and outlet at 180° and a check valve with outlet at the end by means of H. 1/2 "NPT thread. Gasket and flange dimensions (MSS SP-99) Screw 7/16 "UNF: Ref. 5CV-33880.004A for AC Manifold. STAINLESS STEEL, and Ref. 5CV-33880.054B for AC. CARBON Seal: Ref. 5CV-32055.301B for Manifold with PTFE packing, and Ref. 5CV-32055.029A for Manifold with GRAPHITE packing. Screws and gaskets supplied together with the manifold.Linea Family Manifolds MC Series: Manifolds max pressure 420 bar (6000 psi) Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: 2 direct mounted manifold valves ADMISSION PROCESS CONNECTION. F NPT 1/2" F NPT TO FLANGED OUTLET FITTINGS MAX. Pressure up to 3,705 psi (260 bar) Direct mount manifold to F NPT1/2" transmitter inlets on the same manifold body. Mounts to transmitter by two 7/16" UNF screws (L=41.3) and 1 PTFE or metal.loplastic joint. 7/16 "UNF screw Ref. 03388004 for steel manifold steel. Screw 7/16 "UNF Ref. 03388002 for carbon steel manifold. PTFE joint Ref. 11267630 for manifold in PTFE packing. Metal.loplastic joints Ref 41195801 for manifold in Grafoil packaging. These screws and joints are supplied together with the manifold. Coupling sizes according to DIN 19213, except joint system and screws.Línea Familia Manifolds MC Series: Manifols presión máx de 420 bar (6000 psi) Aplicación Alimentaria, Energética, Gasística & Criogénica, Nuclear, Oil & Gas, Química, Tratamiento de aguas
Mecesa © 2024 All rights reserved - Developed by Interactivos