| Linea | Family |
|---|---|
| Fittings and Piping | Forged steel Fittings |
| Application |
|---|
| Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment |
-
DESCRIPCIÓN: ANSI/ASME B16.11 and Series 3000® forged fittings MECESA introduces its range of forged fittings in accordance with ASME B16.10. These include the forged CL. 2000, CL. 3000, CL. 6000 and CL. 9000. -
DESCRIPCIÓN: ANSI/ASME B16.11 and Series 3000® forged fittings MECESA introduces its range of forged fittings in accordance with ASME B16.10. These include the forged CL. 2000, CL. 3000, CL. 6000 and CL. 9000.
Linea Family Fittings and Piping Forged steel Fittings Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: Tube fittings with Megalok® double compression ring system MECESA is pleased to present the MEGALOK fittings in its desire for perfection and better service, trying to provide as much information as possible and extending its range to the needs that we believe are most frequent. All this is the result of our constant line of avant-garde in the very varied production of fittings.Linea Family Fittings and Piping Tube Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment - They are manufactured in three types of materials: 316 grade stainless steel, carbon steel and brass. In installations with plastic tubing, the rings will be made of nylon for brass fittings and PTFE for stainless steel fittings. On request, they can be manufactured in other materials (see Special Materials catalogue).
- Stainless steel and brass fittings are supplied pickled and passivated, and carbon steel fittings are phosphated. Other finishes are available on request. The tube shall have a smooth surface finish, free of grooves in order to achieve a perfect assembly of the two rings to the tube.
- PIPE, in inches, from 1/8 "OD to 1 "OD. PIPE, in millimetres, from 4 mm to 25 mm. Adapters for PIPE from 1/8" to 1/2" to millimetric TUBE.
- Consists of a body with a seat for the pipe, two compression rings and a locking nut. The hermetic connection of the tube to the fitting body is achieved by the pressure exerted by the two rings on the tube when they are pressed by the nut. The function of the front ring is to seal and that of the rear ring is to fix the tube to the fitting. Due to its special conception, both in design and in the variety of materials in which it is made as well as in its connections, it allows it to cover a wide range of applications.
- Applications: In vacuum, low and medium pressure, especially suitable for high pressures, or any other that requires hard work; Food field and laboratories; Resistance to the most corrosive acids; Use in hydraulic installations and gases; Suitable for pipes of stainless steel, carbon steel, copper, plastics, etc.; Can be used for high temperature and cryogenic applications; Vibration resistant; Threaded connections, NPT ANSI/ASME B1.20.1, BSPT-ISO 7R, BSP-ISO 228 and optional in DIN 3852 BSP/METRICA.
-
DESCRIPCIÓN: Tube fittings with Megalok® double compression ring system MECESA is pleased to present the MEGALOK fittings in its desire for perfection and better service, trying to provide as much information as possible and extending its range to the needs that we believe are most frequent. All this is the result of our constant line of avant-garde in the very varied production of fittings.Linea Family Fittings and Piping Tube Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment - They are manufactured in three types of materials: 316 grade stainless steel, carbon steel and brass. In installations with plastic tubing, the rings will be made of nylon for brass fittings and PTFE for stainless steel fittings. On request, they can be manufactured in other materials (see Special Materials catalogue).
- Stainless steel and brass fittings are supplied pickled and passivated, and carbon steel fittings are phosphated. Other finishes are available on request. The tube shall have a smooth surface finish, free of grooves in order to achieve a perfect assembly of the two rings to the tube.
- PIPE, in inches, from 1/8 "OD to 1 "OD. PIPE, in millimetres, from 4 mm to 25 mm. Adapters for PIPE from 1/8" to 1/2" to millimetric TUBE.
- Consists of a body with a seat for the pipe, two compression rings and a locking nut. The hermetic connection of the tube to the fitting body is achieved by the pressure exerted by the two rings on the tube when they are pressed by the nut. The function of the front ring is to seal and that of the rear ring is to fix the tube to the fitting. Due to its special conception, both in design and in the variety of materials in which it is made as well as in its connections, it allows it to cover a wide range of applications.
- Applications: In vacuum, low and medium pressure, especially suitable for high pressures, or any other that requires hard work; Food field and laboratories; Resistance to the most corrosive acids; Use in hydraulic installations and gases; Suitable for pipes of stainless steel, carbon steel, copper, plastics, etc.; Can be used for high temperature and cryogenic applications; Vibration resistant; Threaded connections, NPT ANSI/ASME B1.20.1, BSPT-ISO 7R, BSP-ISO 228 and optional in DIN 3852 BSP/METRICA.
-
DESCRIPCIÓN: ANSI/ASME B16.11 and Series 3000® forged fittings MECESA introduces its range of forged fittings in accordance with ASME B16.10. These include the forged CL. 2000, CL. 3000, CL. 6000 and CL. 9000.
Linea Family Fittings and Piping Forged steel Fittings Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: CHARACTERISTICS Materials: - INOX. clamp for standard fabrication, ASTM A479-304 conventional and ASME SA479-304 nuclear fabrication "C". - Nuts and bolts made of electrolytic zinc plated carbon steel, minimum thickness 9μ, quality 8.8 - Maximum tightening torque 0.30 Kgf-m = 2.94 Nm - Complies with ASME III Subsection NF Section 4725 The casting number shall be engraved on each of the two jaw halves of the jaws for identification with the corresponding quality certificate. Direction of clamped loads per jaw.Linea Family Fittings and Piping Instrumentation clamp Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: CHARACTERISTICS - Materials: - INOX. clamp for standard fabrication, ASTM A479-304 conventional and ASME SA479-304 nuclear fabrication "C". - Bolts and nuts made of electrolytic zinc plated carbon steel, minimum thickness 9μ, quality 8.8 - Maximum tightening torque 0.30 Kgf-m = 2.94 Nm - Complies with ASME III Subsection NF Section 4725 The casting number shall be engraved on each of the two jaw halves of the jaws for identification with the corresponding quality certificate. Direction of clamped loads per jaw.Linea Family Fittings and Piping Instrumentation clamp Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: We manufacture pots, condensers and manifolds of all types, of different diameters or inches, different Sch.., wide variability and range in connections (nipples, swaged nipples, half sleeves, etc.); for different pressures and service temperatures, for different working fluids and type of service; with different materials: Stainless Steel, Carbon Steel, Alloyed Steels such as P22 and P91 for more severe conditions where the pressure resistance of the material is more important; with special surface treatments, according to their working temperature; applied to the new pressure equipment regulations with its article 4. 3. for standards; also being able to design for all categories: I, II, III, IV. According to the connections: - Pots / Condensers - Manifolds According to order: - Standard - Socket/SampleLinea Family Pots and Collectors Pots and Collectorss Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: STAINLESS STEEL, COPPER AND PLASTIC PIPES AND MULTITUBES - Stainless Steel and Carbon Steel Pipes - Copper Pipes - Copper pipes with PVC insulation - Multipipes, steam traced and electric traced pipes STAINLESS STEEL: ASTM A 269 corrosion resistant, seamless, general purpose austenitic stainless steel tubing. Austenitic stainless steel tubes ASTM A 213 seamless for boilers, superheaters and heat exchangers. Pressure calculations are based on ASME B31.3 in accordance with ASTM A213 / A269 tolerances. Calculation temperature from -20°F to 100°F ( -29°C to 38°C). Certified tests: Flaring tests. Rockwell surface hardness < B90. Crush test. Hydrostatic test. COPPER: Annealed copper tubes : ASTMB68/ASTMB75 ASTM B 88 (Type K / Type L) Black PVC coated copper tubes: ASTMB68/ASTMB75 Chemical characteristics (Table 1. ASTM B 68, ASTM B 75 and ASTM B 88). Copper UNS No. C12200 Minimum Copper % 99.9 Phosphorus % 0.015 to 0.040 Calculations made from ASME B31.3 specifications based on a minimum copper stress of 30 Ksi at -20°F to 100°F (-29°C to 38°C) in accordance with the diameter and wall thickness tolerances for each standard.Linea Family Fittings and Piping Tube Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: STAINLESS STEEL, COPPER AND PLASTIC PIPES AND MULTITUBES - Stainless Steel and Carbon Steel Pipes - Copper Pipes - Copper pipes with PVC insulation - Multipipes, steam traced and electric traced pipes STAINLESS STEEL: ASTM A 269 corrosion resistant, seamless, general purpose austenitic stainless steel tubing. Austenitic stainless steel tubes ASTM A 213 seamless for boilers, superheaters and heat exchangers. Pressure calculations are based on ASME B31.3 in accordance with ASTM A213 / A269 tolerances. Calculation temperature from -20°F to 100°F ( -29°C to 38°C). Certified tests: Flaring tests. Rockwell surface hardness < B90. Crush test. Hydrostatic test. COPPER: Annealed copper tubes : ASTMB68/ASTMB75 ASTM B 88 (Type K / Type L) Black PVC coated copper tubes: ASTMB68/ASTMB75 Chemical characteristics (Table 1. ASTM B 68, ASTM B 75 and ASTM B 88). Copper UNS No. C12200 Minimum Copper % 99.9 Phosphorus % 0.015 to 0.040 Calculations made from ASME B31.3 specifications based on a minimum copper stress of 30 Ksi at -20°F to 100°F (-29°C to 38°C) in accordance with the diameter and wall thickness tolerances for each standard.
Linea Family Fittings and Piping Tube Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: ANSI/ASME B16.11 and Series 3000® forged fittings MECESA introduces its range of forged fittings in accordance with ASME B16.10. These include the forged CL. 2000, CL. 3000, CL. 6000 and CL. 9000.Linea Family Fittings and Piping Forged steel Fittings Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: Meceweld welding fittings are used exclusively for connecting to instrumentation piping. They are suitable for the assembly of high pressure circuits with a high degree of responsibility subjected to the harshest and most variable working conditions. The main part of the fittings is their specially machined connection nipple or socket with rigorous tolerances. They have been analytically determined from the general requirements of ASME B31.1, ASME B16.11 and ASME B16.34. They are manufactured in two types of materials: 316 grade stainless steel, carbon steel and brass. On request we can manufacture 304 Stainless Steel, Hastelloy, Inconel, among others (see Special Materials catalog). Stainless steel fittings are supplied pickled and passivated and carbon steel fittings are phosphated. In inches, from 1/4 "O.D. (6.35 m.m.) to 1 "O.D. (25.4 m.m.); in millimeters, from 6 to 20 m.m. Fittings for other pipe dimensions can be supplied upon request. To connect black Pipe (ASME B36.10 M, ASME B36.19M) to calibrated pipe (Tubing), a mixed adapter is provided to allow this variant. Each working pressure is calculated for a temperature range from -10ºF to 100ºF (-29ºC to 38ºC). The operating conditions for other temperatures can be determined from the following equation: Pt = (Pn*K)/1000 = (Bar) Pt = Working pressure at the desired temperature. Pn = Working pressure of the fitting according to its corresponding section and reference. K = Correction coefficient (Catalog Tables). Do not use 316 grade stainless steel fittings where the service temperature may exceed 1000°F (538°C). For 316 grade stainless steel fittings where the service temperature may exceed 1000ºF (538ºC), this should be indicated in the order. Prolonged use of carbon steel at temperatures above 800ºF (427ºC) is not recommended.Linea Family Fittings and Piping Fittings for welding tubing Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment
