| Linea | Family |
|---|---|
| Fittings and Piping | Forged steel Fittings |
| Application |
|---|
| Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment |
-
DESCRIPCIÓN: ANSI/ASME B16.11 and Series 3000® forged fittings MECESA introduces its range of forged fittings in accordance with ASME B16.10. These include the forged CL. 2000, CL. 3000, CL. 6000 and CL. 9000. -
DESCRIPCIÓN: As a complement to the forged accessories according to ASME B16.11, MECESA introduces in its range of fabricators the accessories of the MECEPRIM SERIES, accessories with which we try to increase the possibilities in types of threaded couplings from forged or rolled parts and decrease in some cases of wall thicknesses, and indicating in each accessory the maximum working pressure, determined from the indications of the ASME B31.1 standard.Linea Family Fittings and Piping Threaded Fittings Light Series Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment - They are manufactured in three types of materials: 316 grade stainless steel, carbon steel and brass. On request we manufacture in other materials. Such as 304 stainless steel, Hastelloy, Inconel, etc... among others.
- Stainless steel fittings are supplied pickled and passivated, carbon steel fittings are phosphated and brass fittings are pickled. The connection dimensions correspond to the thread from 1/8" to 1".
- Meceprim fittings have been carefully designed to comply with the characteristics indicated in this catalog according to ASME B31.1 and ASME B31.3 standards, manufactured with a high level of quality.
- Threaded connections are made according to NPT according to ANSI/ASME B1.20.1M BSPT according to ISO 7 and BSP according to DIN 3852-B.
- All Meceprim fittings in accordance with ASME B31.1 are marked in accordance with MSS-SP25.
-
DESCRIPCIÓN: STAINLESS STEEL, COPPER AND PLASTIC PIPES AND MULTITUBES - Stainless Steel and Carbon Steel Pipes - Copper Pipes - Copper pipes with PVC insulation - Multipipes, steam traced and electric traced pipes STAINLESS STEEL: ASTM A 269 corrosion resistant, seamless, general purpose austenitic stainless steel tubing. Austenitic stainless steel tubes ASTM A 213 seamless for boilers, superheaters and heat exchangers. Pressure calculations are based on ASME B31.3 in accordance with ASTM A213 / A269 tolerances. Calculation temperature from -20°F to 100°F ( -29°C to 38°C). Certified tests: Flaring tests. Rockwell surface hardness < B90. Crush test. Hydrostatic test. COPPER: Annealed copper tubes : ASTMB68/ASTMB75 ASTM B 88 (Type K / Type L) Black PVC coated copper tubes: ASTMB68/ASTMB75 Chemical characteristics (Table 1. ASTM B 68, ASTM B 75 and ASTM B 88). Copper UNS No. C12200 Minimum Copper % 99.9 Phosphorus % 0.015 to 0.040 Calculations made from ASME B31.3 specifications based on a minimum copper stress of 30 Ksi at -20°F to 100°F (-29°C to 38°C) in accordance with the diameter and wall thickness tolerances for each standard.Linea Family Fittings and Piping Tube Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: FEATURES B10000 STELLITE SEALING - B45 Punch valves for high pressure applications with Stellite sealing seat for higher temperature applications. to work at higher temperatures. Connections: In all variants from 1/8" to 1", in NPT(ASME B1.20.1), ISO 228 and S.W. (Socket weld.ASMEB16.11). Materials: Constructed from 316 grade stainless steel and carbon steel. Forged body. Stem in 316 grade stainless steel in all versions. 316 grade stainless steel stem tip for stainless steel and carbon steel valves, hastelloy stem tip for stellite valves. Graphite packing (PTFE packing available on request). Rating: Depending on material and connectionLinea Family Instrumentation valves Forged Needle Valves Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: FEATURES B10000 STELLITE SEALING - B45 Punch valves for high pressure applications with Stellite sealing seat for higher temperature applications. to work at higher temperatures. Connections: In all variants from 1/8" to 1", in NPT(ASME B1.20.1), ISO 228 and S.W. (Socket weld.ASMEB16.11). Materials: Constructed from 316 grade stainless steel and carbon steel. Forged body. Stem in 316 grade stainless steel in all versions. 316 grade stainless steel stem tip for stainless steel and carbon steel valves, hastelloy stem tip for stellite valves. Graphite packing (PTFE packing available on request). Rating: Depending on material and connectionLinea Family Instrumentation valves Forged Needle Valves Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment -
DESCRIPCIÓN: Tube fittings with Megalok® double compression ring system MECESA is pleased to present the MEGALOK fittings in its desire for perfection and better service, trying to provide as much information as possible and extending its range to the needs that we believe are most frequent. All this is the result of our constant line of avant-garde in the very varied production of fittings.Linea Family Fittings and Piping Tube Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment - They are manufactured in three types of materials: 316 grade stainless steel, carbon steel and brass. In installations with plastic tubing, the rings will be made of nylon for brass fittings and PTFE for stainless steel fittings. On request, they can be manufactured in other materials (see Special Materials catalogue).
- Stainless steel and brass fittings are supplied pickled and passivated, and carbon steel fittings are phosphated. Other finishes are available on request. The tube shall have a smooth surface finish, free of grooves in order to achieve a perfect assembly of the two rings to the tube.
- PIPE, in inches, from 1/8 "OD to 1 "OD. PIPE, in millimetres, from 4 mm to 25 mm. Adapters for PIPE from 1/8" to 1/2" to millimetric TUBE.
- Consists of a body with a seat for the pipe, two compression rings and a locking nut. The hermetic connection of the tube to the fitting body is achieved by the pressure exerted by the two rings on the tube when they are pressed by the nut. The function of the front ring is to seal and that of the rear ring is to fix the tube to the fitting. Due to its special conception, both in design and in the variety of materials in which it is made as well as in its connections, it allows it to cover a wide range of applications.
- Applications: In vacuum, low and medium pressure, especially suitable for high pressures, or any other that requires hard work; Food field and laboratories; Resistance to the most corrosive acids; Use in hydraulic installations and gases; Suitable for pipes of stainless steel, carbon steel, copper, plastics, etc.; Can be used for high temperature and cryogenic applications; Vibration resistant; Threaded connections, NPT ANSI/ASME B1.20.1, BSPT-ISO 7R, BSP-ISO 228 and optional in DIN 3852 BSP/METRICA.
-
DESCRIPCIÓN: Tube fittings with Megalok® double compression ring system MECESA is pleased to present the MEGALOK fittings in its desire for perfection and better service, trying to provide as much information as possible and extending its range to the needs that we believe are most frequent. All this is the result of our constant line of avant-garde in the very varied production of fittings.Linea Family Fittings and Piping Tube Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment - They are manufactured in three types of materials: 316 grade stainless steel, carbon steel and brass. In installations with plastic tubing, the rings will be made of nylon for brass fittings and PTFE for stainless steel fittings. On request, they can be manufactured in other materials (see Special Materials catalogue).
- Stainless steel and brass fittings are supplied pickled and passivated, and carbon steel fittings are phosphated. Other finishes are available on request. The tube shall have a smooth surface finish, free of grooves in order to achieve a perfect assembly of the two rings to the tube.
- PIPE, in inches, from 1/8 "OD to 1 "OD. PIPE, in millimetres, from 4 mm to 25 mm. Adapters for PIPE from 1/8" to 1/2" to millimetric TUBE.
- Consists of a body with a seat for the pipe, two compression rings and a locking nut. The hermetic connection of the tube to the fitting body is achieved by the pressure exerted by the two rings on the tube when they are pressed by the nut. The function of the front ring is to seal and that of the rear ring is to fix the tube to the fitting. Due to its special conception, both in design and in the variety of materials in which it is made as well as in its connections, it allows it to cover a wide range of applications.
- Applications: In vacuum, low and medium pressure, especially suitable for high pressures, or any other that requires hard work; Food field and laboratories; Resistance to the most corrosive acids; Use in hydraulic installations and gases; Suitable for pipes of stainless steel, carbon steel, copper, plastics, etc.; Can be used for high temperature and cryogenic applications; Vibration resistant; Threaded connections, NPT ANSI/ASME B1.20.1, BSPT-ISO 7R, BSP-ISO 228 and optional in DIN 3852 BSP/METRICA.
-
DESCRIPCIÓN: Tube fittings with Megalok® double compression ring system MECESA is pleased to present the MEGALOK fittings in its desire for perfection and better service, trying to provide as much information as possible and extending its range to the needs that we believe are most frequent. All this is the result of our constant line of avant-garde in the very varied production of fittings.Linea Family Fittings and Piping Tube Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment - They are manufactured in three types of materials: 316 grade stainless steel, carbon steel and brass. In installations with plastic tubing, the rings will be made of nylon for brass fittings and PTFE for stainless steel fittings. On request, they can be manufactured in other materials (see Special Materials catalogue).
- Stainless steel and brass fittings are supplied pickled and passivated, and carbon steel fittings are phosphated. Other finishes are available on request. The tube shall have a smooth surface finish, free of grooves in order to achieve a perfect assembly of the two rings to the tube.
- PIPE, in inches, from 1/8 "OD to 1 "OD. PIPE, in millimetres, from 4 mm to 25 mm. Adapters for PIPE from 1/8" to 1/2" to millimetric TUBE.
- Consists of a body with a seat for the pipe, two compression rings and a locking nut. The hermetic connection of the tube to the fitting body is achieved by the pressure exerted by the two rings on the tube when they are pressed by the nut. The function of the front ring is to seal and that of the rear ring is to fix the tube to the fitting. Due to its special conception, both in design and in the variety of materials in which it is made as well as in its connections, it allows it to cover a wide range of applications.
- Applications: In vacuum, low and medium pressure, especially suitable for high pressures, or any other that requires hard work; Food field and laboratories; Resistance to the most corrosive acids; Use in hydraulic installations and gases; Suitable for pipes of stainless steel, carbon steel, copper, plastics, etc.; Can be used for high temperature and cryogenic applications; Vibration resistant; Threaded connections, NPT ANSI/ASME B1.20.1, BSPT-ISO 7R, BSP-ISO 228 and optional in DIN 3852 BSP/METRICA.
-
DESCRIPCIÓN: Tube fittings with Megalok® double compression ring system MECESA is pleased to present the MEGALOK fittings in its desire for perfection and better service, trying to provide as much information as possible and extending its range to the needs that we believe are most frequent. All this is the result of our constant line of avant-garde in the very varied production of fittings.
Linea Family Fittings and Piping Tube Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment - They are manufactured in three types of materials: 316 grade stainless steel, carbon steel and brass. In installations with plastic tubing, the rings will be made of nylon for brass fittings and PTFE for stainless steel fittings. On request, they can be manufactured in other materials (see Special Materials catalogue).
- Stainless steel and brass fittings are supplied pickled and passivated, and carbon steel fittings are phosphated. Other finishes are available on request. The tube shall have a smooth surface finish, free of grooves in order to achieve a perfect assembly of the two rings to the tube.
- PIPE, in inches, from 1/8 "OD to 1 "OD. PIPE, in millimetres, from 4 mm to 25 mm. Adapters for PIPE from 1/8" to 1/2" to millimetric TUBE.
- Consists of a body with a seat for the pipe, two compression rings and a locking nut. The hermetic connection of the tube to the fitting body is achieved by the pressure exerted by the two rings on the tube when they are pressed by the nut. The function of the front ring is to seal and that of the rear ring is to fix the tube to the fitting. Due to its special conception, both in design and in the variety of materials in which it is made as well as in its connections, it allows it to cover a wide range of applications.
- Applications: In vacuum, low and medium pressure, especially suitable for high pressures, or any other that requires hard work; Food field and laboratories; Resistance to the most corrosive acids; Use in hydraulic installations and gases; Suitable for pipes of stainless steel, carbon steel, copper, plastics, etc.; Can be used for high temperature and cryogenic applications; Vibration resistant; Threaded connections, NPT ANSI/ASME B1.20.1, BSPT-ISO 7R, BSP-ISO 228 and optional in DIN 3852 BSP/METRICA.
-
DESCRIPCIÓN: Tube fittings with Megalok® double compression ring system MECESA is pleased to present the MEGALOK fittings in its desire for perfection and better service, trying to provide as much information as possible and extending its range to the needs that we believe are most frequent. All this is the result of our constant line of avant-garde in the very varied production of fittings.Linea Family Fittings and Piping Double Ring Compression Fittings Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment - They are manufactured in three types of materials: 316 grade stainless steel, carbon steel and brass. In installations with plastic tubing, the rings will be made of nylon for brass fittings and PTFE for stainless steel fittings. On request, they can be manufactured in other materials (see Special Materials catalogue).
- Stainless steel and brass fittings are supplied pickled and passivated, and carbon steel fittings are phosphated. Other finishes are available on request. The tube shall have a smooth surface finish, free of grooves in order to achieve a perfect assembly of the two rings to the tube.
- PIPE, in inches, from 1/8 "OD to 1 "OD. PIPE, in millimetres, from 4 mm to 25 mm. Adapters for PIPE from 1/8" to 1/2" to millimetric TUBE.
- Consists of a body with a seat for the pipe, two compression rings and a locking nut. The hermetic connection of the tube to the fitting body is achieved by the pressure exerted by the two rings on the tube when they are pressed by the nut. The function of the front ring is to seal and that of the rear ring is to fix the tube to the fitting. Due to its special conception, both in design and in the variety of materials in which it is made as well as in its connections, it allows it to cover a wide range of applications.
- Applications: In vacuum, low and medium pressure, especially suitable for high pressures, or any other that requires hard work; Food field and laboratories; Resistance to the most corrosive acids; Use in hydraulic installations and gases; Suitable for pipes of stainless steel, carbon steel, copper, plastics, etc.; Can be used for high temperature and cryogenic applications; Vibration resistant; Threaded connections, NPT ANSI/ASME B1.20.1, BSPT-ISO 7R, BSP-ISO 228 and optional in DIN 3852 BSP/METRICA.
-
DESCRIPCIÓN: Tube fittings with Megalok® double compression ring system MECESA is pleased to present the MEGALOK fittings in its desire for perfection and better service, trying to provide as much information as possible and extending its range to the needs that we believe are most frequent. All this is the result of our constant line of avant-garde in the very varied production of fittings.Linea Family Fittings and Piping Tube Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment - They are manufactured in three types of materials: 316 grade stainless steel, carbon steel and brass. In installations with plastic tubing, the rings will be made of nylon for brass fittings and PTFE for stainless steel fittings. On request, they can be manufactured in other materials (see Special Materials catalogue).
- Stainless steel and brass fittings are supplied pickled and passivated, and carbon steel fittings are phosphated. Other finishes are available on request. The tube shall have a smooth surface finish, free of grooves in order to achieve a perfect assembly of the two rings to the tube.
- PIPE, in inches, from 1/8 "OD to 1 "OD. PIPE, in millimetres, from 4 mm to 25 mm. Adapters for PIPE from 1/8" to 1/2" to millimetric TUBE.
- Consists of a body with a seat for the pipe, two compression rings and a locking nut. The hermetic connection of the tube to the fitting body is achieved by the pressure exerted by the two rings on the tube when they are pressed by the nut. The function of the front ring is to seal and that of the rear ring is to fix the tube to the fitting. Due to its special conception, both in design and in the variety of materials in which it is made as well as in its connections, it allows it to cover a wide range of applications.
- Applications: In vacuum, low and medium pressure, especially suitable for high pressures, or any other that requires hard work; Food field and laboratories; Resistance to the most corrosive acids; Use in hydraulic installations and gases; Suitable for pipes of stainless steel, carbon steel, copper, plastics, etc.; Can be used for high temperature and cryogenic applications; Vibration resistant; Threaded connections, NPT ANSI/ASME B1.20.1, BSPT-ISO 7R, BSP-ISO 228 and optional in DIN 3852 BSP/METRICA.
-
DESCRIPCIÓN: ANSI/ASME B16.11 and Series 3000® forged fittings MECESA introduces its range of forged fittings in accordance with ASME B16.10. These include the forged CL. 2000, CL. 3000, CL. 6000 and CL. 9000.
Linea Family Fittings and Piping Forged steel Fittings Application Food, Power, Gas & Bellows; Cryogenic, Nuclear, Oil & Bellows; Gas, Chemical, Water Treatment
